Układanie i transport kostki brukowej
 1   2 

Installation Machine VM 401

VM 401 is an innovative, state-of-the-art paver installation machine setting new standards due to its special comfort, high carrying capacity and modular design. Established VM-features such as the robust chassis and the double articu-lated steering have also been integrated.
A powerful 4-cylinder diesel engine offers sufficient output reserve. The spacious driver‘s cabin is separated from the chassis and the easy to use joystick operation was improved for driving comfort.

The modular configuration of the cabin and hydraulic system allow for customized equipment matching individual demands.

The VM 401 is available four different configurations:

VM 401-L:
Cabin without glazing, also without doors and windows.    
Seat cover: synthetic leather

VM 401-H:

Partly glazed cabin with scratch resistant security glass at the front and rear side, including windscreen wiper, without door and side window.
Seat cover: synthetic leather

VM 401-K:

Fully glazed cabin with scratch resistand security glass all around, including windscreen wiper, including cabin heating.  

Seat cover: textile

VM 401-KA:

same as VM 401-K, additionally equipped with modern and sturdy electronic PLC-control systemwith preselector for the following motion sequenzes of the HVZ-uni installation clamp:
Manual operation: All movements of the installation clamp are controlled via joystick and foot pedals.
Semi automatic: All movements of the pushoff device are controlled automatically
Fully automatic:: All movements of the clamp are controlled in their correct sequence via electronic control system. By the joystick each individual movement can be additionally activated at any time.
Shifting automatic: modified program run to shift rectangular pavers from the cross or stack bond into the running bond.

Standard specifications for all four configurations:

  • 4-cylinder Kubota diesel engine, 26,5 kW/ 36PS with 3000 lit./min. Excellent running smoothness and high reserve capacity.
  • Continuous hydraulic rotator 
    for precise direction of the HVZ-uni clamp from the driver‘s seat. With four hydraulic rotary joints thus no direct connection between machine and attachment which eliminates the risk of injury due to revolving hydraulic hoses.
  • Double articulated steering  
    and a low center of gravity allow for agile maneuverability and stability. No stress and misalign on the un-compacted paving stones.
  • Outer edges of the machine are adapted to the steering geometry which means that when there are obstacles there are no protruding vehicle parts.
  • Adjustable height steering column. Each foot pedal tilt angle is independently adjustable. Excellent view to the laying edge.
  • Damage resistant wide angle rear view mirror allows for no blind spots. 
  • Sensitive hydrostatic front wheel drive.
  • Wide base tires and different track widths offront and rear axles ensure a low degree of stress on the un-compacted pavers as well as smooth drivability. 
  • All-terrain vehicle due to large diameter of tires and ground clearance.
  • Wide pivoting range of approximately 1,600 mm from a standing position is achieved by steering lock only. 
  • Large lifting height for handling doublestacked pallets up 1,600 mm high, saving a considerable amount of drive time.
  • No adverse effect on the stability due to low outreach even with large lifting height. Low overall height of the VM machine allow for working at underground car parks.  
  • Unlimited all-round-view - also rearwards. As paver installation machines drive 30% at reverse speed!
 Further General Product Information
Link for this Product   
Top
 
 1   2 
 1   2   3 

Układarka do kostki VM 203Układarka mechaniczna do kostki

  • Masa: 1,04 t
  • Moc silnika: 20,5 KM (15,08 kW)
  • Silnik o obniżonej emisji spalin ECE 24 standard CARB 1
  • Udźwig chwytaka 300 kg
  • Prędkość jazdy do 20 km/h
  • Chwytak hydrauliczny HVZ-uni
  • Nisko położony środek ciężkości zapewniający stabilność
  • Chwytak podnoszony do wysokości 1,6 m
  • Czuły hydrostatyczny napęd przednich kół
  • Doskonała mobilność i wydajność maszyny
 More ...
 Further General Product Information
Link for this Product   
Top
 
 1   2 
 1   2   3   4 

Układarka do kostki VM 204 RobotecUkładarka mechaniczna do kostki

  • Masa: 1,32 t
  • Moc silnika: 25 KM (18,6 kW)
  • Silnik o obniżonej emisji spalin ECE 24 standard CARB 1
  • Udźwig chwytaka 400 kg
  • Prędkość jazdy do 20 km/h
  • Chwytak hydrauliczny HVZ z systemem ADV
  • Nisko położony środek ciężkości zapewniający stabilność
  • Elektroniczne sterowanie pracy chwytaka
  • Chwytak podnoszony do wysokości 1,6 m
  • Czuły hydrostatyczny napęd przednich kół
  • Doskonała mobilność i wydajność maszyny
 Accessorie
 More ...
 Further General Product Information
Link for this Product   
Top
 
 1   2 

Chwytak do układania kostki HVZ-GeniusUniwersalny, hydrauliczny chwytak do układania większości dostępnych na rynku wzorów kostki brukowej

  • Chwytak jest przeznaczony do montażu na koparkach
  • Wyposażony w zaciski HVZ-uni
  • Praca urządzenia sterowana w pełni automatycznie
  • Zakres roboczy W 600-1240 mm
  • Regulowane zaciski boczne, zakres roboczy L = 990-1480 mm
  • Głębokość zacisku: 85 mm
 Accessories:
 Further General Product Information
Link for this Product   
Top
 

 Hydraulic Installation Clamp HVZ GENIUS basic

 

The high-performance attachment for mini excavators - ingenious, powerful and lightweight.
HVZ GENIUS basic - especially designed for mechanical paver installation with smaller mini excavators.

Multifunctional with high performance and cleverly thought out hydraulic control: only one hydraulic circuits is required to run all motion sequences including the automatic paver shifting into the running bond.

  • Due to high-tensile material and innovative design the dead weight of the HVZ GENIUS basic clamp ist reduced to approx. 240 kg.
  • For standard equipment see HVZ GENIUS.

  Durable surface protection by galvanizing

 Further General Product Informations
Link for this Product   
Top
 

Mechanikal Paver Installation in Herringbone 45 Degree Format

 

Due to the best interlocking results and therefore best load distribution, heavily travelled areas such as container yards in ports, streets etc. are paved with pavers in herringbone pattern. The conventional way of mechanical paver installation in herringbone pattern requires a lot of manual work of the installer adding key blocks to the laying cluster to achieve full herringbone interlocking. That means additional blocks have to be placed by hand to achieve a non cluster effect throughout the complete area.

The laying crew has to hand install up to 6 additional blocks individually by hand! this ist not only time consuming and exhausting (work has to be done in stooped posture). This moreover requires a high effort in additional logistics as up to 6 additional blocks per layer have to be transported to the place.

 

Probst as the only full-liner in paver laying technique offers a field-proven solution for the purpose too: the paver installation clamp HVZ Herringbone 45 degree format - suitable for operation with the Probst paver installation machines VM as well as an attachment to any carrier, such as mini excavators.

Probst can meanwhile draw on many years of practical expert knowledge with the valuable experience in paver installation of a lot more than half a million aquare meters at mos diverse construction sites all over the world.

The paver installation clamp HVZ Herringbone 45 Degree format picks up the adequately palletized installation pattern (turned at 45 degree on the pallet compared to the convertional alignment of blocks towards the laying clamp) safe and powerful from the pack of pavers. Layer by layer is thus being installed precisely without any manual and time consuming rework.

The outcome of this ist not only a considerable improved performance in paver laying but also effects the significant relief of the laying crew.

The output of 120 square meters and more per hour with a Probst paver installation machine VM ist he result of this innovative laying technique.

 Further General Product Information
Link for this Product   
Top
 
 1   2 
 1   2 

Chwytak do układania kostki HVZ, HVZ-uniUniwersalny chwytak do układania większości dostępnych na rynku wzorów kostki brukowej

  • Chwytak może być montowany do szerokiej gamy maszyn budowlanych np. takich jak: miniładowarki, wózki widłowe, żurawie samochodowe, koparki itp.
  • Uniwersalny regulowany zacisk czołowy.
  • Zakres roboczy W 550-1150 mm pracujący na bezobsługowych stalowo poliamidowych prowadnicach
  • Regulowane zaciski boczne zakres roboczy L = 900-1350 mm
  • Głębokość zacisku: 85 mm

HVZ-uni

  • Zakres roboczy: 600-1240 mm pracujący na bezobsługowych stalowo poliamidowych prowadnicach
  • Regulowane zaciski boczne zakres roboczy: 990-1480 mm
  • Głębokość zacisku: 85 mm
 HVZ uni/HVZ standard convenient design:
 Pushing Off Device ADV:
 Further General Product Informations
Link for this Product   
Top
 

Accessories Hydraulic Installation Clamp HVZ and HVZ-uni

Adapter

For some installation units it can be advantageous or even necessary, predominantly for the side grippers, to use a special adapter in order to achieve optimal gripping.

  • The shifting adapter PA is used with rectangular stones, for instance, to shift pavers into the running bond. (Please, indicate stone formation).
  • When laying installation units in the herring-bone pattern, it is better not to bother with the half stones on the sides and to use a herring-bone adapter FA instead (Please, indicate stone formation).
  • Special adapters SA for installation units 21–24 or similar are available on request 
  • FA-Adapter for HVZ if required - FA external bow for HVZ, FA-Adapter Version HVZ-uni
  • PA-Adapter   consisting of - 2 C-Profiles, 10 positioning adapters Please find further information on length of adapter, etc.

The stone formations

1. The stone formations 1 – 20 shown below are suitable among others for mechanical installation. Other stone formations can also be laid by machines as long as the stones are packed in the correct formation ready for the machine to lay them.

2. The stone formations 16 - 20 are suitable for mechanical installation by the special adapter.

 

3. The stone formations 21 – 24 are suitable for mechanical installation by the special adapter.

4. For other stone formations (not shown), please send in a mould layout.

  

Fork Sleeves ET-L

   For fork lift trucks, with a lock screw and suspension for HVZ. Using this the HVZ can be quickly and easily fastened to any carrier (with a fork attachment).


Universal-Excavator-Suspension

  Universal-Excavator-Suspension Suitable for most current excavators, maximum bolt diameter up to 60 mm.  Advantage: The HVZ can be quickly and easily fastened to any excavator.

 
Crane Boom A-KL  For skid steered loaders, with variable reach. This takes the weight off the back tyres of the skid steered loader and thus protects the new laid pavers from being shifted by steering movements.
It is also advantageous when using other attachments on the skid steered loader, eg. slab clamps, kerb stone laying clamps and such like.

 Further General Product Information
Link for this Product   
Top
 

Wózek do kostki VTK-VRęczny wózek do transportu kostki brukowej

  • Szerokość robocza szczęk: od 540 do 1050 mm
  • Długość robocza szczęk: 200 mm
  • Wysokość transportowanego materiału: do 900 mm
  • Ładowność: 400 kg
 Further General Product Information
Link for this Product   
Top
 

Hydraulic Slice Grab HSZ:
If it not possible to install layers of pavers mechanically (layer is not ready to install, a colour mix is required ...) this attachment for Laying Machines VM and also for Mini-Excavators accelerates the material distribution from the pallet to instalation point tremendously.

  • Enormous clamping force, also not vertically strapped rows of pavers 80 mm thickness and more can be picked up safely.
  • Wen attached to a carrier by using a hydraulic rotator it is a one man operation.
  • Wide range of special grippers available, such as rotating grippers to turn concrete elements from horizontal to vertical position.
 Further General Product Information
Link for this Product   
Top
 

Wózek do palet PW Ręczny wózek widłowy do transportu kostki brukowej

  • Max. długość palety: 1250 mm
  • Duże gumowe koła dla łatwego transportu
  • Możliwość hamowania wózka na nachyleniach
  • PW I / PW II - odległość między widłami; 380 mm, Ładowność: 1400 kg
  • PW III - odległość między widłami: regulowana, Ładowność: 1500 kg
 Further General Product Information
Link for this Product   
Top
 

 PFLASTER MARKER PM

 

Der raffinierte Marker für den GaLa-Bau schlechthin.

  • Markiert nahezu alle Werkstoffe mit einem konstant 2 mm breiten Strich, ideal um Pflaster passgenau einzuschneiden.
  • Geeignet für trockene und nasse Oberflächen, hinterlässt jedoch keine dauerhafte Markierung, wittert nach kurzer Zeit selbst ab.
  • Unzerbrechlich, Kreide wird mit eingelagerten Glasfasern verstärkt.
  • Verschleißfest, ein PM markiert tausende Pflastersteine.

 

 

 

 

 

Link for this Product   
Top
 
 
Foot